| Previous Releases:
Version
3.03—
June 08, 2010
Adds the following features:
1. This firmware fixes occasional problems with starting the RF scan using the remote control software.
2.Automatic channel selection:
To use this feature, hold down either the A or B edit button and turn the RF channel selection knob.
The receiver will scan all channels and automatically select the best available channel. This process takes about 1 second.
Version
2.99—
September 4, 2009
Adds the following features:
1. Diversity switching is improved, eliminating unnecessary switching.
Version
2.97—
March 24, 2009
Adds the following features:
1. The compressor threshold range is now increased to 0 to -60 dB (was 0 to -30 dB)
2. On 2 channel receivers, both channels can now be set to the same channel.
Version
2.88— August 01, 2005
Fixes
a programming issue with Asian versions of Windows and the
Sabine Upgrade Wizard.
Version
2.81 —
April 07, 2005
Adds
network identification function. Receiver front panel flashes
when you click that receiver’s icon in the Device
Network window of the remote software. You can also identify
receivers by right-clicking the display in the All-Channel
View. This is a handy way of verifying your hardware/software
connections.
Version 2.75
— March
03, 2005
Channel
names set from the Remote software are now displayed on
the receiver LCD. Diversity switching is not displayed on
the LCD if there is no RF carrier. Computer connections
to the receiver are improved for the Upgrade Wizard. Default
setting for the FBX is now Bypass mode.
For Guitar players: Automatic output gain
switching is now in effect. When setting the beltpack to
GUI (instrument) mode, the output gain of the receiver is
reduced by 20 dB. This allows better interfacing with guitar
amplifiers. This can be disabled by setting dipswitch #3
up. This feature is only available on receivers with serial
numbers above xx17000.
Version 2.68
— January 11, 2005
You will need to have version 2.10 or above Remote Control Software to control receivers
flashed with version 2.68 firmware.
Version
2.68 improves RF performance and reduces the likelihood
of muting and dropouts.
Version 2.60 —
December 4, 2004
Version
2.60 offers the following improvements: Improved telemetry
reception, which speeds up the recognition of a transmitter
being turned on and increases range. Also new condenser
mic models are available. In addition, when turning off
the transmitter or in case of a lost connection, the current
mic model remains active. When turning the RF channel knob,
the channel is changed on the second click, as in the other
front panel control knobs.
Version
2.40 — October 4, 2004
You
will need to have version 2.1 or above Remote Control Software
to control receivers flashed with version 2.40 firmware.
Version
2.40 offers
the following improvements: When a beltpack is in operation
and set to Guitar mode the receiver De-esser knob becomes
a Cable Compensator and allows for a high-frequency cut
that simulates the loss from an instrument cable. In addition
Output Mixing is enabled by pressing both the Channel A
and B selector buttons. Output mixing mixes the audio from
both channels and sends it out both of the audio outputs.Version
2.40 also improves computer connections when using a USB
cable.
Version
2.06 — April 20, 2004
Version 2.06 offers the following improvements:
This
version provides increased range and fewer drop outs.
Version
2.03 —February 24, 2004
Version 2.03 offers the following improvements:
Front panel control knob response is improved.
Version
2.02 —
December
10, 2003
Version 2.02 offers the following improvements:
Faster loading times of Networked ND systems; The reset
parameters function will reset the B channel parameters
when Reset All is chosen in the software, and USB communications
are improved.
Version
2.01 —
November 17, 2003
Version
2.01 offers the following improvements: The expander settings
for the A and B channel are now truly independent and the
expander settings and Mic Models are updated automatically
and accurately when changing from handheld mic to the beltpack,
and from guitar to mic settings on a beltpack.
Version
2.00 —
November 11, 2003
Version
2.00 is the first firmware version released |