|
Version
2.30— Oct 08, 2009
- Auto port search: the user no longer has to figure out what port the receiver is connected to. It automatically searches and connects now.
- Connection is more robust. It automatically fixes most communication errors and stays connected.
- Extension antenna wizard: Guides user through setting the gain on extension antennas.
- Presets for compressor settings. There is now a dropdown to select several presets for compressor settings.
- The GUI is now used for both the SWM6000 and SWM7000 receivers. It can connect to both of them and even network them together.
- Some graphical inconsistencies have been fixed as well as some other minor bugs.
Version
2.25— June 29, 2006
Improves network connections when controlling multiple receivers.
Version
2.23— August 1, 2005
Improves
a few programming functions.
Version
2.22— April 7, 2005
Adds
network identification function. Receiver front panel flashes
when you click that receiver’s icon in the Device Network
window of the remote
software. You can also identify receivers by right-clicking the
display in the All-Channel View. This is a handy way of verifying
your hardware/software connections. Saves your selected channel
range in the RF Scan for your entire session.
Version
2.2— March 2, 2005
The remote software now stores the channel names in the receiver,
so they get recalled when the receiver is connected. In previous
versions, the names were not saved. The channel names are displayed
on the receiver LCD. This requires system firmware 2.75 for the
name recall to work. The RF scan function now allows you to select
a range of channels to scan.
Version
2.18 BETA — December
1, 2004
Version 2.18b remote software will work
with all versions of firmware on all receivers.
Version
2.18b improves RF scan. Only one Sabine transmitter should be
on at a time during scanning.
Version 2.16 — December 2, 2004
Version 2.16 remote software will work with all versions
of firmware on all receivers.
Version 2.16
offers the following improvements: The Copy Parameters feature
is improved. This allows settings for any channel to be copied
to one or more other channels. This includes all audio related
parameters, such as filters, bypass states, compressor settings,
output level, de-esser settings, and Mic Modeling. When there
are more than 4 receivers connected, the rows in the channel window
(bottom of screen) scroll up and down. The Save and Load File
function is also improved. The settings of one receiver can be
saved to a file (.set) for one receiver or all receivers (.all)
in an ND network of receivers. Clicking on Reset Dynamic Filters
or Reset Parameters no longer forces the channel to change to
A. Also, the RF scanner has been improved for a more sensitive
and accurate scan of available channels. New condenser mic models
are available with version 2.16.
Version 2.14 — July 8, 2004
Version 2.14 remote software will work with all versions of firmware
on all receivers.Version 2.14 offers the following improvements:
USB communication is improved and up to 8 comm ports are supported.
Support for output mixing is also included.
Version
2.13
— May 26, 2004
Version 2.13 remote software will work with all versions of firmware
on all receivers. Improvements include: Newly designed FBX screen.
Version
2.12 —
February 20, 2004
Version 2.12 remote software will work with all versions of firmware
on all receivers. Improvements include: Newly designed help file.
Version
2.11 —
November 20, 2003
Version 2.11 remote software will work with all versions of firmware
on all receivers.
Version
1.1 —
November 14, 2003
Version 1.1 remote software requires version 1.1 receiver firmware.
Version 1.1 remote software will not communicate with receivers
flashed with other than version 1.1 firmware. |