The DQX-206 (two inputs, six outputs) offers 20-bit A/D and D/A converters.  ClipGuard™ adaptive clip level control automatically adjusts the DQX’s dynamic range to match the input signal, allowing the unit to accept signals up to 26 dBV without clipping, and increases the effective dynamic range to >94 dB; it eliminates digital clipping forever!  A built-in programmable limiter allows you to control the maximum signal level and protects speakers from overload damage without program distortion.  The DQX provides programmable signal routing, and each output has up to 2.5 seconds of delay, three programmable EQ filters (parametric, high pass or low pass) and individual output level control.  The unit also has an automatic speaker polarity indicator.    

In addition, the DQX’s AutoSetup Mode automatically calculates and sets the precise delay time for each channel in a few seconds.  Imagine being able to press a button and watch your digital delay processor automatically calculate the delay quickly and accurately, and then set each channel to the proper delay time.    

The DQX-206 also features 10 memory storage locations; 20 microsecond resolution; displays in feet, meters, or milliseconds; front panel lockout; and remote control via contact closure or RS232 (These features are not yet implemented).   

Sabine’s DQX aligns your speakers, greatly increases dynamic range, protects your speakers and sets up in seconds. For the ultimate in multi-featured delay processing, choose the Sabine DQX-206.  

PERFORMANCE  

• Frequency Response: +/- 0.2 dB @ +22 dBV, 10 Hz to 22 kHz 
• Dynamic Range: >94 dB 
• THD: <0.02% @ 22 dBV at 1 kHz 

• Range: up to 2.5 seconds per channel 
• Minimum Increment: 20 microseconds 
• Digital Resolution: 20 bit A/D & D/A 

• 3 programmable EQ filters per output channel (any combination of parametric, high pass or low pass).  
• Digital notch filters controlled parametrically from 20Hz- 20KHz. 
• High pass filter with cutoff frequency, user-controllable in 1/6th octave intervals between 20Hz and 1KHz, 12dB/octave roll-off.  
• Low pass filter with cutoff frequency, user-controllable in 1/6th octave intervals from 3.15KHz and 20KHz, 12dB/octave roll-off. 
• Notch filter depth: controllable in .5dB steps from +12dB to -84dB. 
• Filter width: user-controllable from 1.0 octave to 0.01 octave. 
• Resolution: 1Hz from 20Hz to 20KHz.  

• Threshold: +29 to -10 dBV peak in 1 dB steps 
• Mode: Soft/Hard with variable preset 
• Attack: 1 to 99 msec. in 1 msec. steps 
• Release: 0.05 to 5 sec. in 0.05 sec. steps 

• 2x20 character LCD Feet, meter, milliseconds display 

• Input Impedance: Balanced >10 K Ohms, PIN 2 high 
• Output Impedance: Balanced 10 Ohms nominal, PIN 2 high 
• Maximum Output Load: 600 Ohms 
• Input/Output Maximum Signal Levels: Balanced +26 dBV peak 
• Headroom: +22 dB peak @ 4 dBV nominal input 
• I/O connectors: XLR 3-pin 

• 100, 117, 230 VAC +/-15%, 50/60 Hz, <18 Watt  

• 1-U Rack Mount; 19 x 1.75 x 8.5 in. (48.3 x 4.5 x 21.6 cm) Weight: 8.0 lb. (3.6 kg) nominal