When you use Presets, you are saving to and recalling from the receiver. In contrast, when using Files, you are saving to and recalling from your computer.
To save the current receiver’s settings to a Preset, use the SELECT PROGRAM pulldown to choose which Preset will be written to. Next, click on the SAVE button to save the Preset to the receiver. You will be given an opportunity to name the Preset after clicking on the SAVE button.
To load a Preset from the receiver’s program memory, select the Preset with the SELECT PROGRAM pulldown, and then click LOAD to load the settings.
Note that no Preset settings are loaded or saved until the LOAD or SAVE button is pressed!