Adjustable High Cut / Low Cut Filter control is available only in software.
These controls are located to the right of the FBX & Parametric filters in the software Command View. For the LOW CUT FILTER, the SWM7000 will attenuate frequencies at and below your knob setting with a slope of 12 dB per octave. For the HIGH CUT FILTER, frequencies at and above the knob setting will be attenuated 12 dB per octave. The extreme counterclockwise knob position of the LOW CUT FILTER and the extreme clockwise position of the HIGH CUT FILTER turn the filters off. The range of the HIGH CUT FILTER extends from a starting point of 3 KHz to 20 KHz. The range of the LOW CUT FILTER extends from 20 Hz at the bottom to 1 KHz at the top. The frequency chosen is the point at which attenuation of the filter reaches 3 dB. In other words, the filter roll-off actually begins just above (for low cut filter) or below (for high cut) the chosen frequency.