Command View
Brings up the Command View window. Click to view example.

All Channel View
Brings up the All Channel View window. Allows you to see the receiver name, transmitter name, channel selected, RF signal, battery, audio signal, compression and diversity antenna selected telemetry for all networked transmitters.

Set FBX Parameters
Brings up a control panel for setting width, depth, sensitivity and persistance parameters. You can also set the dynamic filter timeout and reset all filters to factory defaults. Click the Toolbar buton for more information.

Front Panel Lock Settings
The front panel controls of the SWM7000 receivers may be “locked” so that unauthorized or accidental changes to the parameters will not occur. Click the Toolbar buton for more information.

RF Scanner
The front panel controls of the SWM7000 receivers may be “locked” so that unauthorized or accidental changes to the parameters will not occur. Click the Toolbar buton for more information.

Name Receiver & Channels
Allows you to name the receiver and channels.

Select Receiver
Brings up a window that allows you to select a receiver to control.