When you use files, you are saving to and recalling from your computer. In contrast, when using presets, you are saving to and recalling from the receiver itself.
There are 2 options: save/recall a single receivers' settings, OR save/recall ALL receivers settings.
To save a single receiver’s settings — First make sure the receiver you want to save is the selected receiver, then select File ¬ Save One Receiver’s Settings from the Menu Bar. A dialog box will ask you for a filename, and then click OK to store the settings to disk.
To recall a single receiver’s settings — First make sure the receiver you want to load is the the selected receiver, then select File ¬ Recall One Receiver’s Settings, and use the dialog box to find the file you wish to load, click OK, and the settings will be loaded into the selected receiver.
To save all connected receivers’ settings — Select File ¬ Save All Receivers’ Settings, use the dialog box to name the file, and click OK to save it to disk.
To recall all connected receivers’ settings — Select File ¬ Recall All Receivers’ Settings, use the dialog box to select the file to load, and click OK to load the file to the receivers. The time this takes is proportional to the number of receivers connected to the SWM7000 Remote.