Graphi-Q
: Tech Note
Back panel Contact Closure Switch Connector
Back panel Contact Closure Switch Connector
| Click images to enlarge | |
| Graphi-Q Contact Closure | |
| All Graphi-Qs
include a back panel mounted contact closure connector which can be used for
remotely changing the stored presets. This male 8-pin Phoenix connector is
labeled 1-7 with the last pin marked as C for common. The female connector
comes as an accessory in every Graphi-Q. Accessing the first seven presets is simply a matter of connecting the common with one of the 7 pins. Accessing the rest of the presets involves using set combinations of the pins to achieve a total of 68 possible presets. |
 |
| Using the GRQ-Remote software you can save presets to any contact closure location. Choose OPTIONS>ASSIGN CONTACT CLOSURES to save presets to any contact closure location (valid with firmware and software version 3.30 and higher). |
Menubar selection |
| Graphi-Q Remote Control Software Contact Closure Window | |
| You will see a handy wiring diagram on your screen for each possible contact closure position. The first seven stored presets default to the first seven contact closure locations (valid with all versions of firmware and software). |
 Contact Closure window |
| Contact Closure External Switch | |
| In order to use this remote switching feature you will need to supply an external switch. This can be momentary (100 msec minimum) or make/break. Here are two recommended switches: |  Rotary Switch |
|