Inputs and Outputs
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced
Audio Performance
Frequency Response: +/- 0.1dB (20 to 20kHz)
Dynamic Range: 115dB typ (unweighted)
CMMR: > 60dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @+4dBu)
Digital Audio Performance
Processor: 40-bit
Sampling Rate: 96 kHz (4802, 8802);
48kHz (240, 360, 480)
Analog Converters: High Performance 24-bit
Propagation Delay: 1.2ms for 96kHz, 1.5ms for 48kHz
Front Panel Controls
Display: 4 x 26 (4802, 8802) / 2 x 16 (240, 360, 480)
Character Backlit LCD
Level Meters: 5 segment LED
Buttons: Mute/Edit Controls, Menu Controls
Data Encoder: Embedded Thumb Wheel
Connectors
Audio: 3-pin XLR or Euroblock – model dependent
RS-232: Female DB-9
USB: Type B
Ethernet: RJ45 (4802, 8802)
Power: Standard IEC Socket
General
Power: 100-240 VAC (50-60Hz)
Dimensions: 19”x1.75”x9” (483x44x229 mm)
Weight: 7lbs / 3.2kg
Audio Control Parameters
Gain: -40 to +15dB in 0.25dB steps
Polarity: +/-
Delay: Up to 650ms per I/O (4802, 8802); 80ms per I/O (240, 360, 480)
Equalizers (8 per I/O)
Type: Parametric, Hi-shelf, Lo-shelf
|
Gain: -30 to +15dB in 0.25dB steps
Bandwidth: 0.02 to 2.50 octaves (Q=0.5 to 72)
Crossover Filters: Allows asymmetrical filters
Filter Types: Butterworth, Bessel, Linkwitz Riley
Slopes: 6 to 48dB/oct
Compressor/Limiters
Threshold: -20 to +20dBu
Attack: 0.3 to 100ms
Release: 2 to 32X the attack time
FBX Filters
8 independent FBX digital filters per channel, each switchable between FBX fixed filters and FBX dynamic filters
Filter depth: Maximum automatic depth adjustable from -6 to -40 dB
Filter width: User-controllable from 2.50 to .02 octave
Resolution: 1 Hz from 20 Hz to 20 KHz
Time required to find & eliminate feedback: typically 0.3 seconds @ 1 KHz
System Parameters
No. of Programs: 30
Program Names: 12 character length
Delay Units: ms, ft, m
Frequency Adjustment: up to 1Hz resolution
Security Lock: Lock/Unlock, by menu and function
Copy Channels: All parameters
Link Channels
Remote Control
Navigator Remote Control Software
• RS232 & USB: Standard on all units
• Ethernet: Control up to 16 Navigators per session; requires network switch
• NAVRC-100 Wall-mount Remote Control Panel; RS422 Control of up to 2 Navigators per panel; each Navigator can be addressed by up to 32 panels
Upgrades
Operating system firmware stored in Flash RAM. All future upgrades for firmware and software downloadable from Sabine website using Upgrade Wizard.
Notes:
Below approximately 200 Hz the feedback filters become slightly wider to increase the feedback and rumble capture speed at these low frequencies.
Tests performed using an Audio Precision System One model 322 or equal. (Specifications subject to change without notice) |