Sabine Navigators can be controlled from the front panel, the remote control software, or the NAVRC-100 Remote Contol Wall Panel. These attractive panels mount in standard 2-gang wall-boxes, and they provide control over many Navigator functions. Each panel has a set of control buttons and a backlit LCD for displaying menu parameters.
Programming the wall panels is done using the Navigator Wall Panel Setup software, and this PC-software allows you to create custom menus for each Navigator function, and allows for limiting the accessable range of each function. For example, you can allow for only small changes in gain at the wall panel.
In order to use the wall panel to control a Navigator you must have the R (Remote Control) option. These Navigators are equipped with two RJ-45 connectors on the back panel. The one on the left (facing the back of the unit) is the Ethernet connector and the one on the right is the wall panel connector.
Features
• Fits in standard 2-gang wall box
• Power is supplied by the connected Navigator
• Included in the box:
• Complete controller mounted on cover plate, ready to install
• Programming port and ribbon cable
• Not included but required for installation:
• CAT5 Ethernet cable - to run from Navigator to NAVRC-100
• Standard 9-pin RS232 serial cable (for setup only)
• Standard 2-gang wall box and mounting screws
• PC computer with Navigator Wall Panel Setup software installed and RS232 serial connection (for setup only)
Standard CAT-5 Ethernet cable with RJ-45 connectors is used to connect the wall panel controller to this jack. The Navigator supplies power to the wall panel controller via the Ethernet cable. The maximum cable length from one wall panel to a Navigator is 200 feet.
Your application may require the ability to control one or more Navigators from one or more Wall Panels. Because there is only one Wall Panel connector on each Navigator, you can connect either multiple Navigators or Wall Panels by daisy-chaining the Wall Panels. You can connect up to two Navigators to one Wall Panel, or you can connect up to 32 Wall Panels to one Navigator. You can combine these scenarios, too. For example, you might have two Wall Panels, each with the ability to control two Navigators.
Software
Wall panel